Connect
- Follow the guided setup, or paste an
srt://host:port?…address and the fields fill in. - Version 1.0 connects as a caller: the other end must be listening. Listener mode is coming in a future update.
- Pick Receive to watch the stream, or Send to send your camera and microphone as a test source.
Passphrase and stream ID
- A passphrase must be 10–79 characters and match on both ends.
- If the passphrase is wrong, the app says so: packets arrive but cannot be decrypted.
- Some servers need a stream ID. Ask whoever runs the server for it.
Reading the numbers
- The health line at the top gives one verdict: good, or what is wrong.
- Tap any figure (hover on the Mac) for a plain-words explanation.
- Rule of thumb: latency should be at least 3–4 times the round-trip time.
Ad cues (SCTE-35)
- The Ad cues card shows each cue as it arrives, in plain words.
- In Send mode you can insert a test cue into your outgoing stream.
- The verdict line names what is missing if cues do not arrive.
Can't connect?
- Check the host and port, and that the other end is listening.
- Firewalls must allow UDP on that port.
- Saved connections sync to your other devices through iCloud. Give it a minute.
Your data
Nothing is collected. See the privacy policy.